- Monday 8:30 AM - 5:00 PM
- Tuesday 8:30 AM - 5:00 PM
- Wednesday 8:30 AM - 5:00 PM
- Thursday 8:30 AM - 5:00 PM
- Friday 8:30 AM - 5:00 PM
- Saturday Closed
- Sunday Closed
John Deere Financing Available - Ask our experts instore! **ALL units can be ordered - Talk to our experts instore!**
|
Spend more time working and less time switching equipment with easy implement swaps 1 Family Tractors are designed to minimize the time and effort needed to switch-out implements to accommodate different jobs.
1 Family Tractors can have up to three implements mounted simultaneously due to standard dual selective control valves (SCVs), allowing you to switch from using one implement to another without stopping to adjust. When a third SCV kit is added, the number of possible combinations is greatly increased. |
Quickly and easily change speed and directions with Twin Touch foot controls and Hydrostatic transmission (HST) The hydrostatic transmission’s infinite ground speeds and direction of travel are both controlled with the Twin Touch foot pedals.
|
Excellent maneuverability and easy operation with standard four-wheel drive (4WD) and power steering Both 4WD and power steering are standard equipment on the 1 Family Tractors. This combination allows for excellent maneuverability and ease of operation.
|
Comfortable and convenient open operator’s station The 1023E open operator station is designed for greater comfort and increased visibility. Comfortable operation
|
Foldable Roll-Gard™ ROPS is standard equipment on 1023E. INCREASED VISIBILITY
|
INSTRUMENTATIONUpdated instrumentation is standard equipment for operating convenience and confidence. Instrumentation includes:
|
SUSPENSION SEATThe spring suspension seat adjusts fore/aft for operator convenience. The seat adjustment lever is located in the center under the seat area. The seat flips forward for protection from the elements. |
MOWER DECK HEIGHT-ADJUSTMENT KNOB
|
BEVERAGE HOLDER AND ADDITIONAL STORAGEThe beverage holder is contour-molded and seated into the fender for a clean look. It is conveniently located and dual-sized to accommodate many containers. The placement of the cup holder is within arm's reach. Additional storage is conveniently placed into the fender for loose items like keys and work gloves. |
FUEL FILL AND FUEL GAUGE LOCATIONSThe fuel fill location is conveniently accessible on the left-hand side fender. The fuel gauge is located in close proximity to make the fuel refilling process easier. |
Flexibility in operation with multiple mid-mower lift system options MID-MOWER LIFT SYSTEM OPTIONS
Standard mechanical mower lift
For more information on this mid mower lift system click here. |
Engine power (gross) | SAE J1995 rated power: 16 kW 21.5 hp 21.8 PS at 3200 rpm |
---|---|
Power take-off (PTO) power | 11.1 kW 14.9 hp |
Steering hydraulics | 13.2 L/min 3.5 gpm |
Implement hydraulics | 13.2 L/min 3.5 gpm |
Hitch type | Limited Category 1 |
Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
Standard transmission; forward/reverse | Hydrostatic - two range |
Cruise control | No |
Approximate shipping weight (open-station; cab) | Open station: 656 kg 1446 lb Cab: Not applicable |
Wheelbase | 1450 mm 57.1 in. |
Manufacturer | Yanmar® |
---|---|
Engine model | 3TNM74F-NCJT |
Engine power (gross) | SAE J1995 rated power: 16 kW 21.5 hp 21.8 PS at 3200 rpm |
Power take-off (PTO) power | 11.1 kW 14.9 hp |
Rated engine speed | 3200 rpm |
Type | Diesel |
Injection pump type | Indirect injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | Three cylinders: 0.993 L 60.6 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 74 x 77 mm 2.91 x 3.03 in. |
Compression ratio | 23.5:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 47.7 Nm 35.2 lb-ft |
Fuel tank capacity | 24 L 6.3 U.S. gal. |
Battery size | 500 CCA |
---|---|
Alternator (12-V) | 40 amp |
Starter size | 1.2 kW 1.6 hp |
Type | Indirect injection |
---|
Standard transmission; forward/reverse | Hydrostatic - two range |
---|---|
Left-hand reverser | No |
Final drive | Spur gear |
Brakes | Wet disc (left-hand pedal) |
Steering | Power |
Axle capacity | Front 612 kg 1349 lb Rear 715 kg 1576 lb |
Creeper | No |
Cruise control | No |
Differential lock | Yes |
Type | Open center |
---|---|
Pump rated output | Steering 13.2 L/min 3.5 gpm Implement 13.2 L/min 3.5 gpm 24 L/min 6.3 gpm |
Pump type | Single gear |
Maximum operating pressure | 138 bar 2000 psi |
Draft control sensing | Select control |
Remote control valves available | Three |
Type | Limited Category 1 |
---|---|
Lift capacity, 24-in. behind link arms | 344 kg 758 lb |
Standard | Rear: 540 rpm Mid: 2100 rpm |
---|---|
Control | Independent |
Clutch | Wet disk |
Brake (for mid and rear PTO) | Wet disk |
Crankcase with filter | 2.7 L 2.9 gal. |
---|---|
Transmission and hydraulic system | 12.3 L 3.2 gal. |
Type | Spur gear |
---|---|
Differential lock | Yes |
Rollover protective structure | Type Foldable Yes |
---|---|
Platform - flat/straddle | One-piece semi flat |
Gear shift location - console/floor | Left-hand side |
Wheelbase | 1450 mm 57.1 in. |
---|---|
Turning radius without brakes | Outside front tire: 2.51 m 8.2 ft |
Limited slip differential | No |
Approximate shipping weight (open-station; cab) | Open station: 656 kg 1446 lb Cab: Not applicable |
Front | R3 Turf: 18x8.50-10 R4: 18x8.5-10 |
---|---|
Front tread range | 931 mm 36.7 in. |
Rear tread spacing | 895 mm 35.2 in. |
Toolbox | Yes |
---|