Trimmers, Brush Cutters and Clearing Saws

967 65 88-01
Cylinder displacement
21.7 см³
Power output
0.6 kW
Knife Length
60 cm
Weight
5.0 kg
An efficient job starts with a sharp blade
Long life gear components
Two-stage air filter
Multi position handle

Husqvarna Grass trimmers for occasional use are low noise and lightweight trimmers suitable for homeowners. They have easy to use functions such as Smart Start® recoil system and fuel pump.
967 62 82-01
Usage level
Occasional use
Cylinder displacement
21.7 см³
Power output
0.6 kW
Weight (excl. cutting equipment)
4.8 kg
Intuitive controls
Auto return stop switch
Fuel Pump
Smart Start®

Husqvarna Grass trimmers for occasional use are low noise and lightweight trimmers suitable for homeowners. They have easy to use functions such as Smart Start® recoil system and fuel pump.
967 09 87-01
Usage level
Occasional use
Battery voltage
36.5 V
Weight (excl. cutting equipment)
2.93 kg
Weight without battery
3.33 kg
Tap ‘n Go
savE™
Brushless motor
Cordless freedom

Husqvarna Grass trimmers for occasional use are low noise and light weight trimmers suitable for homeowners. They have easy to use functions such as Smart Start® recoil system and fuel pump.
966 71 27-01
Usage level
Occasional use
Cylinder displacement
21.7 см³
Power output
0.6 kW
Weight (excl. cutting equipment)
4.4 kg
Fuel pump
Smart Start®
Auto return stop switch
Ergonomic handle

Exceptionally easily operated forestry clearing saw with high performance and unique ergonomical solutions designed for full time spacing tasks. Optimized transmission with the bevel gear angled 24 degrees simplifies directional felling in dense forests. Easily started X-torq® engine with rapid acceleration, reduced fuel consumption and emissions. Very low vibrations thanks to an effective anti-vibration of the engine, drive shaft and cutting equipment. Easy to start with Smart Start®. Delivered with Balance XT harness.
966 06 32-01
Cylinder displacement
34.6 см³
Power output
1.6 kW
Weight (excl. cutting equipment)
12.4 kg
Total load distribution
Flexible saw suspension
X-Torq® engine
Auto return stop switch

Exceptionally easily operated forestry clearing saw with high performance and unique ergonomical solutions designed for full time spacing tasks. Optimised transmission with the bevel gear angled 24 degrees simplifies directional felling in dense forests. Easily started X-torq® engine with rapid acceleration, reduced fuel consumption and emissions. Very low vibrations thanks to an effective anti-vibration of the engine, drive shaft and cutting equipment. Easy to start with Smart Start®. Delivered with Balance XT harness.
967 63 79-03
Cylinder displacement
45.7 см³
Weight (excl. cutting equipment)
8.7 kg
Power output
2.1 kW
Adjustable handle bar
X-Torq® engine
Adjustable harness hook eyelet
Balance X

Exceptionally easily operated forestry clearing saw with high performance and unique ergonomical solutions designed for full time spacing tasks. Optimised transmission with the bevel gear angled 24 degrees simplifies directional felling in dense forests. Easily started X-torq® engine with rapid acceleration, reduced fuel consumption and emissions. Very low vibrations thanks to an effective anti-vibration of the engine, drive shaft and cutting equipment. Easy to start with Smart Start®. Delivered with Balance XT harness.
966 01 60-02
Cylinder displacement
45.7 см³
Power output
2.1 kW
Weight (excl. cutting equipment)
8.7 kg
Adjustable handle bar
X-Torq® engine
Adjustable harness hook eyelet
Balance X

Exceptionally easily operated forestry clearing saw with high performance and unique ergonomical solutions designed for full time spacing tasks. Optimised transmission with the bevel gear angled 24 degrees simplifies directional felling in dense forests. Easily started X-torq® engine with rapid acceleration, reduced fuel consumption and emissions. Very low vibrations thanks to an effective anti-vibration of the engine, drive shaft and cutting equipment. Easy to start with Smart Start®. Delivered with Balance XT harness.
966 62 91-03
Cylinder displacement
53.3 см³
Power output
2.8 kW
Weight (excl. cutting equipment)
8.9 kg
Smart Start®
Adjustable Handlebar
Thumb-Operated Throttle
Easy Blade Switch

Exceptionally easily operated forestry clearing saw with high performance and unique ergonomical solutions designed for full time spacing tasks. Optimised transmission with the bevel gear angled 24 degrees simplifies directional felling in dense forests. Easily started X-torq® engine with rapid acceleration, reduced fuel consumption and emissions. Very low vibrations thanks to an effective anti-vibration of the engine, drive shaft and cutting equipment. Easy to start with Smart Start®. Delivered with Balance XT harness.
967 17 65-03
Cylinder displacement
45.7 см³
Power output
2.2 kW
Weight (excl. cutting equipment)
8.2 kg
Adjustable handle bar
Thumb-operated throttle
Easy blade switch
LowVib®

Exceptionally easily operated forestry clearing saw with high performance and unique ergonomical solutions designed for full time spacing tasks. Optimised transmission with the bevel gear angled 24 degrees simplifies directional felling in dense forests. Easily started X-torq® engine with rapid acceleration, reduced fuel consumption and emissions. Very low vibrations thanks to an effective anti-vibration of the engine, drive shaft and cutting equipment. Easy to start with Smart Start®. Delivered with Balance XT harness.
966 01 56-03
Cylinder displacement
45.7 см³
Power output
2.2 kW
Weight (excl. cutting equipment)
8.2 kg
Smart Start®
Adjustable handlebar
Thumb-operated throttle
Easy blade switch

The FSA 130 R is a powerful and lightweight battery brushcutter for working on large areas of grass and thin weeds. This professional series unit comes with a single strap harness and AutoCut® mowing head. It also features a self-reset locking lever and LED display with 3-speed settings. This unit requires an additional purchase of any AP battery carrying system or an A backpack battery.
Technical data
Rated Voltage (V) | 36 |
Cutting head | AutoCut 25-2 |
Weight without battery (kg / lb) | 3.9-8.6 |
R backpack battery.

The lightweight professional HL 94 extended reach articulating hedge trimmer, powered by the fuelefficient, low-noise STIHL 2-MIX™ engine with ECOSPEED, features a 145° adjustable head working range. The head also folds flat for transport and storage convenience.
Technical data
Overall length (cm) 1) | 242 |
Displacement (cc) | 24.1 |
Power output (kW) | 0.9 |
Weight (kg / lbs) 2) | 6.2 /13.6 |

Easy to operate, the HL 91 K (0°) features a powerful, fuel-efficient, low-emission engine. Its compact design provides excellent manoueverability and includes an innovative ergonomic rubberized control handle with ECOSPEED throttle control, allowing for variable speed regulation. This convenient tool is designed to help professionals work longer with reduced fatigue.
Technical data
Power Output kW | 0.9 |
Power output (kW) | 0.9 |
Displacement cc | 24.1 |
Weight (kg / lbs) 1) | 5.3 / 11.7 |

This professional unit replaces the HS 81 R with the latest in STIHL technology. Equipped with stratified scavenging engine technology that reduces fuel consumption by 20% and fulfils all emission regulations, long life air filter for prolonged engine protection, double-sided, sharpened cutting blades for a high quality cut, adjustable multi-function handle and a tool-less fuel cap. This hedge trimmer is an innovative unit designed with the demanding professional in mind.
Technical data
Displacement (cc) | 22.7 |
Power output (kW/bhp) | 0.7 / 1.0 |
Weight (kg / lbs) 1) | 5.4 / 11.9 |
Cutting bar length (in) | 24 |

The professional HS 82 T hedge trimmer for trimming and sculpting replaces the HS 81 T with the latest in STIHL technology. Equipped with stratified scavenging engine technology that reduces fuel consumption by 20% and fulfils all emission regulations, long life air filter for prolonged engine protection, double-sided, sharpened cutting blades for a high quality cut, adjustable multi-function handle and a tool-less fuel cap. This hedge trimmer is an innovative unit designed with the demanding professional in mind. Available in two versions with a 24″ or 30″ blade.
Versions
-
HS 82 T – 24″ cutting bar
$699.95*
-
HS 82 T – 30″ cutting bar
$729.95*
Technical data
Displacement (cc) | 22.7 |
Power output (kW/bhp) | 0.7 / 1.0 |
Weight (kg / lbs) 1) | 5.1-5.3 / 11.2-11.7 |
Cutting bar length (in) | 24 |

The STIHL HS 56 hedge trimmer is the ideal balance of power and portability for professional users. Its 24″ cutting blade is supported by a remarkably lightweight design, adding comfort and control to those extended cutting and pruning jobs.
Technical data
Displacement (cc) | 21.4 |
Power output (kW/bhp) | 0.6 / 0.9 |
Weight (kg / lbs) 1) | 4.5 / 9.9 |
Cutting bar length (in) | 24 |















