2024 John Deere 2653B PrecisionCutâ„¢
|
|
Specifications
Model |
2653B PrecisionCutâ„¢
|
Year |
2024
|
Sale Type |
New
|
Manufacturer |
John Deere
|
Quantity |
0
|
Manufacturer Qty |
0
|
Price |
Contact for price CAD
|
|
|
|
Description
- Full-time 3WD hydrostatic system
- Air-restriction indicator
- Fixed front roller
- Powerful Yanmar
|
|
FEATURES
|
Features
Full-time three-wheel drive (3WD) hydrostatic system directs oil flow to wheels with traction, reducing wheel slip in tough terrain
The 2653B PrecisionCut™ Trim and Surrounds Mower features a full-time 3WD hydrostatic traction system that directs hydrostatic oil flow to wheels with traction in tough terrain. This means if an operator gets into a situation where one wheel begins to slip, the hydrostatic system supplies fluid to the other two wheels to provide traction power.
This system provides plenty of hill-climbing power without the need for any weight-transfer system. What's even more impressive is this system requires no extra valves for operation. This reduces hydraulic leak point opportunities while still providing ample climbing power.
By being a full-time 3WD system, the unit is always in three-wheel drive, even in transport. The system is powered by the same hydrostatic pump used on the 2500B PrecisionCut Riding Greens Mower for optimum hill-climbing performance.
|
One-piece plenum design, U-shaped hydraulic reservoir, and other conveniences for ease of service
The 2653B PrecisionCut™ makes a strong statement when it comes to service conveniences.
The air plenum and hood are combined into a one-piece design. Simply turn the hood latch and raise the hood to gain service access to the air restriction indicator, engine oil dipstick, backlapping valve, hydraulic components, coolant level fill, and more. All daily service checks are easily accessible.
Standard onboard electrical diagnostics are located beneath the access panel just below the operator control panel. This allows for electrical system diagnosis from the seat. Sit-on-seat (SOS) diagnostics are integrated into the electrical system, alerting the operator to potential starting problems.
The hydraulic oil cooler can be removed by removing wing nuts. The use of wing nuts makes it possible to service the oil cooler without the use of any tools.
A large U-shaped hydraulic tank is easily accessed at the rear of the machine. The reservoir features a convenient fill point on top of the tank and a dipstick for checking the hydraulic fluid level.
The 2653B PrecisionCut Trim and Surrounds Mower features improved access to the engine to hydro coupler for fan belt repair. Simply loosen the locking ring and slide the coupler to allow room for fan belt installation.
|
Frame design for a wide stance and low center of gravity for excellent stability
A low center of gravity and a wide, 55-in. (140-cm) wheelbase ensure comfortable and safe operation, even in adverse mowing conditions.
Wide 20x10-10 front and 20x10-8 rear turf tires provide excellent traction and stability for superior mowing performance.
|
Powerful 3-cylinder diesel engine
The 2653B PrecisionCut™ Trim and Surrounds Mower uses a 19.6 hp* (14.6 kW) gross (per SAEJ 1995 at 3000 rpm) liquid-cooled diesel engine for smooth, efficient, and quiet operation.
With the 3-cylinder diesel engine and a large 7.4-U.S. gal. (28.0-L) fuel tank, the 2653B PrecisionCut gives the operator plenty of power and fuel for a productive day of mowing.
This engine meets EPA Tier 2 and Tier 4 compliance standards.
*Engine horsepower and torque information are provided by the engine manufacturer to be used for comparison purposes only. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s website for additional information.
|
Durable frame built to handle the toughest terrain
The 2653B PrecisionCut™ Trim and Surrounds Mower can improve the appearance of many areas on the golf course. It can maintain tees, approaches, fairways, green surrounds, first-cut rough, and rough. These tough demands can put a strain on lesser frames, but not that of the 2653B Mower.
The 2653B PrecisionCut frame is designed with all these demands in mind and provides excellent weight distribution and the durability required for the most-demanding terrain. The frame design keeps a low center of gravity while providing excellent visibility to the front cutting units and rear of the machine.
|
White box electronic control module provides onboard electrical diagnostics as standard equipment
This controller gives the technician on-board diagnostics as standard equipment, meaning there are no diagnostic tools or plug-ins to purchase separately. No tools are required to access the white box controller. Simply disengage the latch to open up the access panel. This allows the technician to troubleshoot electrical problems while sitting in the operator seat.
The controller has a heartbeat feature to aid the technician in diagnostics. When the LED light in the center of the controller is flashing at a regular rate, it indicates the controller is properly powered up and there are no circuit problems. Each switch or solenoid on the machine has its own LED light on the controller. Input and output functions can be diagnosed by observing the appropriate lights.
When the heartbeat LED light is flashing at an irregular rate, it indicates there is a system fault of some sort. The irregular flashing rate leads the technician to the circuit to start proper diagnostics. These codes can be found on the front of the access panel to the controller. Detailed information is located in the operator's manual and technical manual.
|
Sit-on-seat (SOS) diagnostics provide aid when starting machine
SOS diagnostics are provided to assist the operator in getting the machine started. The SOS system checks the machine system functions to be sure they are in the proper configuration for starting.
The system functions that must be satisfied to crank the machine are as follows:
|
Air-restriction indicator with sight glass visually shows if air restriction is present
An air-restriction indicator is standard on the 2653B PrecisionCut™ Trim and Surrounds Mower. The air-restriction indicator has a sight glass with markings that show if service to the air cleaner is required. This air-restriction indicator is the same one used on the 2500B PrecisionCut Diesel Riding Greens Mower.
When the sight glass in the air-restriction indicator shows red, a major airflow restriction in the system needs to be addressed immediately.
|
|
KEY SPECS
|
Key_Specs
Engine Type |
Indirect Inject Diesel |
Engine power (net) per SAE J1349 @ 3000 rpm |
14.6 kW
19.6 hp
*Engine hp is provided by the engine manufacturer to be used for comparison purposes only. Actual operating hp will be less. Refer to the engine manufacturer’s Web site for additional information. |
Number of cylinders |
3-cylinder |
Displacement |
60.6 cu in.
993 cc |
Traction drive |
3 Wheel Drive Hydrostatic, equal traction to all wheels |
Reel control valves |
Micro-backlap valve with reel speed control |
Mowing position width |
183 cm
72 in.
or 213 cm
84 in. |
Mower size |
Quick Adjust QA7: 66 cm
26 in.
or QA7: 76 cm
30 in. |
Number of blades |
Five or eight |
Reel diameter |
17.8 cm
7 in. |
|
ENGINE
|
Engine
Type |
Indirect Inject Diesel |
Fuel |
Diesel |
Engine power (gross) per SAE J1995 @ 3000 rpm |
14.6 kW
19.6 hp
*Engine hp is provided by the engine manufacturer to be used for comparison purposes only. Actual operating hp will be less. Refer to the engine manufacturer’s Web site for additional information. |
Engine power (net) per SAE J1349 @ 3000 rpm |
14.2 kW
19.1 hp
*Engine hp is provided by the engine manufacturer to be used for comparison purposes only. Actual operating hp will be less. Refer to the engine manufacturer’s web site for additional information. |
Air cleaner |
Dual-stage, restriction indicator |
Cooling |
Liquid |
Oil filter |
Full-flow filter |
Engine oil capacity |
3 L
3.1 U.S. qt |
Pressurized lubrication system |
Standard |
Number of cylinders |
3-cylinder |
Displacement |
60.6 cu in.
993 cc |
|
MACHINE
|
Machine
Drive type |
Fixed |
Conveyor chain slat type |
Under shot slat |
Length |
185 cm
73 in. |
Feed Accelerator, Stone Trap (FAST) |
Reverser
Standard: 59 kW
79 hp
Standard |
|
OPERATOR CONTROLS
|
Operator_Controls
Front chaffer |
0.6 m2
6.46 sq ft |
Chaffer |
3.06 m2
32.9 sq ft |
Sieve area |
2.64 m2
28.4 sq ft |
Total cleaning area (louvered) |
6.27 m2
67.5 sq ft |
Cleaning fan speed |
Regular speed: 550 - 1350 rpm
Slow speed: 300 - 600 rpm |
|
INSTRUMENTATION
|
Instrumentation
Grain tank size |
11,000 L
300 bu |
Unloading auger length |
7.05 or 8.7 m
23.5 or 28.5 ft |
Peak unloading rate |
115 L/s
3.3 bu/sec |
|
ELECTRICAL AND SAFETY INTERLOCKS
|
Electrical_and_Safety_Interlocks
|
WEIGHT AND DIMENSIONS
|
Weight_and_Dimensions
Date collected |
04-May-2018 |
|
SOUND LEVELS
|
Sound_Levels
Operator ear |
87 dBA |
Measuring standard |
ISO 11201 |
Attachments installed |
Reels Engaged |
|
MOWER
|
Mower
Number |
3 reel cutting units |
Size |
Quick Adjust QA7: 66 cm
26 in.
or QA7: 76 cm
30 in. |
Number of blades |
Five or eight |
Backlapping |
Standard |
Clip frequency |
5-blade cutting unit,
3.17 mm/km/h
0.201 in./mph
8-blade cutting unit
1.99 mm/km/h
0.126 in./mph |
Front rollers |
Optional: grooved, solid, or spiral: 7.5 cm
3 in. |
Reel diameter |
17.8 cm
7 in. |
Bedknife adjustment |
Reel-to-bedknife |
Certification |
ANSI B71.4-2004; 2-Post SAE J21294 Roll Over Protection Structure with seat belts meets ISO 21299 standard; Yanmar engine meets EPA Tier 2, Interim Tier 4, and Tier 4 |
|
LITERATURES
|
|